Xtreme 4x4

JEEP WRANGLER JL - FOR Alpine IR Long Control Arm & Bracket Kit – 8-Arm (3-6" Lift) - TERAFLEX 1310510

CODE: 1310510
JEEP WRANGLER JL - FOR Alpine IR Long Control Arm & Bracket Kit – 8-Arm (3-6
Dhs. 16,500.00 In Stock Sold out
Add to compare Added to compare

EXPEDITED SHIPPING

100% ORIGINAL AND QUALITY

24 MONTHS GUARANTEE

  • Description
  • Shipping and Refund
  • Reviews
DETAILS :
TeraFlex JL: Alpine IR Long Arms and Long Arm Brackets provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 3–6” lifts. Our innovative, maintenance-free IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping to improve on- and off-road ride quality and performance. CAD-engineered TeraFlex JL: Long Arm Brackets are designed for maximum strength. By streamlining the frame-end mounting points, we were able to incorporate both upper and lower mounts in each bracket thus simplifying installation while maintaining a factory appearance. Front Long Arm Suspension Crossmember provides additional strength. Can be added to any existing suspension lift.

FEATURES & BENEFITS :
Alpine IR Control Arms (Short / Long):
- Innovative, maintenance-free IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping to improve on- and off-road ride quality and performance JL / JT: Long Control Arms (Alpine/IR) and Long Arm Brackets:
- Adjustable Long Control Arms and Long Arm Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3–6” lift kits
- Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
- On higher lifts, bolt-on Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop and shock load transferred through the Long Control Arms
- Long Arm Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
- Long Arm Brackets feature a premium triple-stage powder coating that provides superior durability and corrosion resistance
- Front Long Arm Suspension Crossmember provides additional strength
- Install and drive simple bolt-on installation — no welding required Adjustable Control Arms (all):
- Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
- Full range of movement will not restrict articulation or flex off-road
- Zero maintenance forged threaded joints for smooth quiet flex
- Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance 
- Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
- TeraFlex Lifetime Warranty against defects
 
FITMENT INFO :

-(2018-2022) JL Wrangler (4-door).

SPECS :
JL / JT: Alpine IR Long Arm Pair – Front Upper (# 1310520):
- Tube Diameter & Wall: 42mm x 4mm
- Factory Length: 20-1/4”
- Min. Length: 27-3/4”
- Max. Length: 28-7/8”
- Bolt – Axle: 12mm
- Bolt – Frame: 14mm
- IR Bushing – Axle: 611018
- IR Bushing – Frame: 611016
JL / JT: Alpine IR Long Arm Pair – Front Lower (# 1310500):
- Tube Diameter & Wall: 50mm x 5mm
- Factory Length: 24”
- Min. Length: 30-7/8”
- Max. Length: 32”
- Bolt – Both: 16mm
- IR Bushing – Both: 611020
JL: Alpine IR Long Arm Pair – Rear Upper (# 1310560):
- Tube Diameter & Wall: 50mm x 5mm
- Factory Length: 17-3/8”
- Min. Length: 32-3/4”
- Max. Length: 33-3/4”
- Bolt – Both: 14mm
- IR Bushing – Axle: 611015
- IR Bushing – Frame: 611016
JL: Alpine IR Long Arm Pair – Rear Lower (# 1310540):
- Tube Diameter & Wall: 50mm x 5mm
- Factory Length: 19-3/4”
- Min. Length: 36-1/4”
- Max. Length: 37-3/8”
- Bolt – Both: 14mm
- IR Bushing – Both: 611015

PRODUCT NOTES :

- Adjustable Long Control Arms (JL: Alpine: # 1316005) (JL: Alpine IR: # 1310505) MUST be used w/ Long Arm Bracket Kit (JL 2dr: # 1958002) (JL 4dr: # 1958000).
- REQUIRES cutting/removal of factory control arm bracketry to install Long Arm Brackets.
- Alignment REQUIRED.
- Available Rock Guard Transmission Skid Plate & Long Arm Crossmember. Reinforcement (JL / JT: # 4609100) protects your transmission and reinforces your Front Long Arm Suspension Crossmember.
RECOMMENDED, BUT NOT REQUIRED. IR Bushing:
- Kit – 8 Long Arms (JL: # 1952801)
- Front Upper (JL / JT – Axle: # 611018) (JL / JT – Frame: # 611016)
- Front Lower (JL / JT: # 611020 x 2)
- Rear Upper (JL – Axle: # 611015) (JL – Frame: # 611016) (JT: # 611020 x 2)
- Rear Lower (JL: # 611015 x 2) (JT: # 611020 x 2)
- Replacement Tool Kit (# 1952900)
 

INSTALLATION INSTRUCTIONS CUTOUT TEMPLATE

INSTALLATION INSTRUCTIONS 

Sample Return Policy

 1. Returns

Option 1 – No Refunds/Exchanges:

We do not accept returns or exchanges unless the item you purchased is defective. If you receive a defective item, please contact us at [•] with details of the product and the defect. You can send the item you consider defective to:

Upon receipt of the returned product, we will fully examine it and notify you via e-mail, within a reasonable period of time, whether you are entitled to a refund or a replacement as a result of the defect. If you are entitled to a replacement or refund, we will replace the product or refund the purchase price, using the original method of payment.

Option 2 – Refunds Permitted:

We accept returns. You can return unopened items in the original packaging within 30 days of your purchase with receipt or proof of purchase. If 30 days or more have passed since your purchase, we cannot offer you a refund or an exchange.

Upon receipt of the returned item, we will fully examine it and notify you via email, within a reasonable period of time, whether you are entitled to a return. If you are entitled to a return, we will refund your purchase price and a credit will automatically be applied to your original method of payment.

Only regular priced items may be refunded. Sale items are non-refundable.

To follow-up on the status of your return, please contact us at [•].

2. Exchanges [Delete if you select Option 1]

We only exchange goods if they are defective or damaged. In circumstances where you consider that a product is defective, you should promptly contact us at [•] with details of the product and the defect. You can send the item you consider defective to:

Upon receipt of the returned product, we will fully examine it and notify you via e-mail, within a reasonable period of time, whether you are entitled to a replacement as a result of the defect. If you are eligible, we will send you a replacement product.

3. Exceptions [May be included if you select Option 2]

Some items are non-refundable and non-exchangeable. These include: [list items]

4. Shipping

To return the item you purchased, please mail it to:

Refunds do not include any shipping and handling charges shown on the packaging slip or invoice. Shipping charges for all returns must be prepaid and insured by you. You are responsible for any loss or damage to hardware during shipment. We do not guarantee that we will receive your returned item. Shipping and handling charges are not refundable. Any amounts refunded will not include the cost of shipping.

Recently Viewed